Add GUI support for selecting routing protocols in use on virtual

routers.  The GUI now provides menus for enabling / disabling RIPv2,
RIPng, OSPFv2 and OSPFv3, as well as mechanisms for automatic
generation of appropriate quagga / xorp config files.  Routing
protocols can only be enabled or disabled on per-router basis, i.e.
no finer-grain control over individual routing protocol parameters
or options is provided.  If required, users can extend the
machine-generated quagga or xorp config file skeletons using the
"Custom config" menu option.

By default, all new quagga or xorp router instances will have both
RIPv2 and RIPng enabled, just as it was before this change.  The
defaults can be changed in menu Tools -> Routing protocol defaults,
which will be applied both to all selected routers (if any) at the
time of change, as well as to all the subsequentially created ones.

Thanks Ana!!!

Bug found by:
Submitted by:	Ana Mijocevic <ana.mijocevic at fer.hr>
Reviewed by:
Approved by:
Obtained from:

diff --git a/editor.tcl b/editor.tcl
index 330ed2e7e8eab0b2f6ed1de70c811a4cbf480fa3..5336342798f16859755ee6ccfb4a6d1f3128245f 100755 (executable)
--- a/editor.tcl
+++ b/editor.tcl
@@ -26,7 +26,7 @@
 # and Technology through the research contract #IP-2003-143.
 #
 
-# $Id: editor.tcl,v 1.90 2008/05/17 01:57:02 marko Exp $
+# $Id: editor.tcl,v 1.91 2008/10/23 12:04:20 marko Exp $
 
 
 #****h* imunes/editor.tcl
@@ -1413,7 +1413,7 @@ proc button1 { c x y button } {
            if { $x > [expr $x2-($x2-$x1)/8.0]} { set r 1 }
            if { $y < [expr $y1+($y2-$y1)/8.0]} { set u 1 }
            if { $y > [expr $y2-($y2-$y1)/8.0]} { set d 1 }
-       
+
            if {$l==1} {
                if {$u==1} { 
                    set resizemode lu
@@ -1545,8 +1545,9 @@ proc button1-motion { c x y } {
        set lastX $x
        set lastY $y
                        # actually we should check if curobj==bkgImage
-    } elseif { $activetool == "oval" && \
-      ( $curobj == $newoval || $curobj == $background || $curtype == "background" || $curtype == "grid")} {
+    } elseif { $activetool == "oval" && ( $curobj == $newoval \
+       || $curobj == $background || $curtype == "background" \
+       || $curtype == "grid")} {
        # Draw a new oval
        if {$newoval == ""} {
            set newoval [$c create oval $lastX $lastY $x $y \
@@ -1557,9 +1558,10 @@ proc button1-motion { c x y } {
                $lastX $lastY $x $y
        }
                        # actually we should check if curobj==bkgImage
-    } elseif { $activetool == "rectangle" && \
-      ( $curobj == $newrect || $curobj == $background || $curtype == "background") || $curtype == "grid"} {
-      # Draw a new rectangle
+    } elseif { $activetool == "rectangle" && ( $curobj == $newrect \
+       || $curobj == $background || $curtype == "background") \
+       || $curtype == "grid"} {
+       # Draw a new rectangle
        if {$newrect == ""} {
            set newrect [$c create rectangle $lastX $lastY $x $y \
                        -outline blue \
@@ -2059,9 +2061,11 @@ proc focusAndFlash {W {count 9}} {
 proc popupConfigDialog { c } {
     upvar 0 ::cf::[set ::curcfg]::curcanvas curcanvas
     upvar 0 ::cf::[set ::curcfg]::oper_mode oper_mode
-    global activetool router_model link_color supp_router_models
-    global badentry
-
+    global activetool link_color 
+    global badentry 
+    global ripEnable ripngEnable ospfEnable ospf6Enable
+    global router_ConfigModel
+    global wi
     set wi .popup
     catch {destroy $wi}
     toplevel $wi
@@ -2110,8 +2114,6 @@ proc popupConfigDialog { c } {
            switchCanvas none
            return
        }
-       set model [getNodeModel $target]
-       set router_model $model
        wm title $wi "$type configuration"
        frame $wi.ftop -borderwidth 4
        if { $type == "rj45" } {
@@ -2124,17 +2126,67 @@ proc popupConfigDialog { c } {
        $wi.ftop.name insert 0 [getNodeName $target]
        pack $wi.ftop.name $wi.ftop.name_label -side right -padx 4 -pady 4
        pack $wi.ftop -side top
+
        if { $type == "router" } {
            frame $wi.model -borderwidth 4
-           label $wi.model.label -text "Model:"
-           if { $oper_mode == "edit" } {
-               eval tk_optionMenu $wi.model.menu router_model \
-                   $supp_router_models
+           label $wi.model.label -text "Model:" 
+           frame $wi.protocols -borderwidth 4
+           label $wi.protocols.label -text "Protocols:"
+           checkbutton $wi.protocols.rip -text "rip" -variable ripEnable
+           checkbutton $wi.protocols.ripng -text "ripng" -variable ripngEnable 
+           checkbutton $wi.protocols.ospf -text "ospfv2" -variable ospfEnable
+           checkbutton $wi.protocols.ospf6 -text "ospfv3" -variable ospf6Enable 
+           radiobutton $wi.model.quagga -text quagga \
+               -variable router_ConfigModel -value quagga -command {
+               $wi.protocols.rip configure -state normal
+               $wi.protocols.ripng configure -state normal
+               $wi.protocols.ospf configure -state normal
+               $wi.protocols.ospf6 configure -state normal
+           }
+           radiobutton $wi.model.xorp -text xorp \
+               -variable router_ConfigModel -value xorp -command {
+               $wi.protocols.rip configure -state normal
+               $wi.protocols.ripng configure -state normal
+               $wi.protocols.ospf configure -state normal
+               $wi.protocols.ospf6 configure -state normal
+           }
+           radiobutton $wi.model.static -text static \
+               -variable router_ConfigModel -value static -command {
+               $wi.protocols.rip configure -state disabled
+               $wi.protocols.ripng configure -state disabled
+               $wi.protocols.ospf configure -state disabled
+               $wi.protocols.ospf6 configure -state disabled
+           }
+ 
+           set router_ConfigModel [getNodeModel $target]       
+           if { $router_ConfigModel != "static" } {
+               set ripEnable [getNodeProtocolRip $target]
+               set ripngEnable [getNodeProtocolRipng $target]
+               set ospfEnable [getNodeProtocolOspfv2 $target]
+               set ospf6Enable [getNodeProtocolOspfv3 $target]
            } else {
-               tk_optionMenu $wi.model.menu router_model $model
-           }
-           pack $wi.model.menu $wi.model.label -side right -padx 0 -pady 0
-           pack $wi.model -side top
+               $wi.protocols.rip configure -state disabled
+               $wi.protocols.ripng configure -state disabled
+               $wi.protocols.ospf configure -state disabled
+               $wi.protocols.ospf6 configure -state disabled
+           }  
+           if { $oper_mode != "edit" } {
+               $wi.model.quagga configure -state disabled
+               $wi.model.xorp configure -state disabled
+               $wi.model.static configure -state disabled
+               $wi.protocols.rip configure -state disabled
+               $wi.protocols.ripng configure -state disabled
+               $wi.protocols.ospf configure -state disabled
+               $wi.protocols.ospf6 configure -state disabled
+           }    
+       
+           pack $wi.model -side top -fill x -pady 10
+           pack $wi.model.label -side left -padx 0 -pady 0
+           pack $wi.model.quagga $wi.model.xorp $wi.model.static \
+               -side left -expand 1 
+           pack $wi.protocols -side top
+           pack $wi.protocols.label $wi.protocols.rip $wi.protocols.ripng \
+               $wi.protocols.ospf $wi.protocols.ospf6 -side left
        }
 
        if { $type != "rj45" } {
@@ -2461,7 +2513,7 @@ proc popupConfigDialog { c } {
     "popupConfigApply $wi $object_type $target 0"
     focus $wi.butt.apply
     button $wi.butt.cancel -text "Cancel" -command \
-    "set badentry -1 ; destroy $wi"
+    "set badentry -1; destroy $wi"
     pack $wi.butt.cancel $wi.butt.apply -side right
     pack $wi.butt -side bottom
     bind $wi <Key-Escape> "set badentry -1; destroy $wi"
@@ -2589,7 +2641,7 @@ proc editStartupCfg { node deleted } {
        frame $w.buttons
        pack $w.buttons -side bottom
     button $w.buttons.addccfg -text "Add new" \
-        -command "customConfigApply $w $node 1"
+       -command "customConfigApply $w $node 1"
        button $w.buttons.apply -text "Apply" \
            -command "customConfigApply $w $node 0"
        button $w.buttons.delete -text Delete -command \
@@ -2667,7 +2719,9 @@ proc customConfigApply { w node addccfg } {
 proc popupConfigApply { wi object_type target phase } {
     upvar 0 ::cf::[set ::curcfg]::oper_mode oper_mode
     upvar 0 ::cf::[set ::curcfg]::eid eid
-    global changed router_model link_color badentry
+    global changed link_color badentry
+    global router_ConfigModel
+    global ripEnable ripngEnable ospfEnable ospf6Enable
     global customEnabled ipsecEnabled
     global showIPsecConfig
        
@@ -2691,12 +2745,21 @@ proc popupConfigApply { wi object_type target phase } {
            setNodeName $target $name
            set changed 1
        }
-       if { $oper_mode == "edit" && $type == "router" && \
-           $router_model != $model } {
-           setNodeModel $target $router_model
+       if { $oper_mode == "edit" && $type == "router"} {
+           setNodeModel $target $router_ConfigModel        
+           if { $router_ConfigModel != "static" } {
+               setNodeProtocolRip $target $ripEnable
+               setNodeProtocolRipng $target $ripngEnable
+               setNodeProtocolOspfv2 $target $ospfEnable
+               setNodeProtocolOspfv3 $target $ospf6Enable
+           } else {
+               $wi.protocols.rip configure -state disabled
+               $wi.protocols.ripng configure -state disabled
+               $wi.protocols.ospf configure -state disabled
+               $wi.protocols.ospf6 configure -state disabled
+           }
            set changed 1
-       }
-
+       } 
        foreach ifc [ifcList $target] {
            if { [nodeType [peerByIfc $target $ifc]] != "rj45" && \
                [nodeType $target] != "rj45" } {
@@ -3565,14 +3628,15 @@ proc selectZoom { x y } {
     grab $w
 }
 
+
 #****f* editor.tcl/changeAddressRange
 # NAME
 #   changeAddressRange -- change address range for selected nodes
 # SYNOPSIS
 #   changeAddressRange
 # FUNCTION
-#     
-#   
+#
+#
 #****
 proc changeAddressRange {} {
     global changed
@@ -3583,18 +3647,100 @@ proc changeAddressRange {} {
     set selected_nodes [selectedNodes]
     foreach node $selected_nodes {
        foreach ifc [ifcList $node] {
-           set peer [peerByIfc $node $ifc] 
-            if {[lsearch $selected_nodes $peer] != -1} {
-               if {[string range $node 1 end] < [string range $peer 1 end]} {
+           set peer [peerByIfc $node $ifc]
+           if { [lsearch $selected_nodes $peer] != -1 } {
+               if { [string range $node 1 end] < [string range $peer 1 end] } {
                    set changeAddrRange 1
                }
                autoIPv4addr $node $ifc
                set changed 1
                set changeAddrRange 0
            }
-       }   
+       }
     }
     redrawAll
     updateUndoLog
 }
 
+#****f* editor.tcl/routerDefaultsApply
+# NAME
+#   routerDefaultsApply-- router defaults apply
+# SYNOPSIS
+#   routerDefaultsApply $wi
+# FUNCTION
+#   This procedure is called when the button aplly is pressed in 
+#   popup router defaults dialog box.
+# INPUTS
+#   * w -- widget
+#****
+
+proc routerDefaultsApply { wi } {
+    upvar 0 ::cf::[set ::curcfg]::node_list node_list
+    upvar 0 ::cf::[set ::curcfg]::oper_mode oper_mode
+    global changed router_model routerDefaultsModel router_ConfigModel
+    global routerRipEnable routerRipngEnable routerOspfEnable routerOspf6Enable
+    global rdconfig
+
+    lset rdconfig 0 $routerRipEnable
+    lset rdconfig 1 $routerRipngEnable
+    lset rdconfig 2 $routerOspfEnable 
+    lset rdconfig 3 $routerOspf6Enable 
+    set routerDefaultsModel $router_model      
+    set model quagga
+    set selected_node_list [selectedNodes]
+    set empty {}
+
+    if { $selected_node_list != $empty } {
+       foreach node $selected_node_list {
+           if { $oper_mode == "edit" } {
+               setNodeModel $node $router_model
+               set router_ConfigModel $router_model
+               if { $router_ConfigModel != "static" } {
+                   set ripEnable [lindex $rdconfig 0]
+                   set ripngEnable [lindex $rdconfig 1]
+                   set ospfEnable [lindex $rdconfig 2]
+                   set ospf6Enable [lindex $rdconfig 3]
+                   setNodeProtocolRip $node $ripEnable
+                   setNodeProtocolRipng $node $ripngEnable
+                   setNodeProtocolOspfv2 $node $ospfEnable
+                   setNodeProtocolOspfv3 $node $ospf6Enable
+               } else {
+                   $wi.protocols.rip configure -state disabled
+                   $wi.protocols.ripng configure -state disabled
+                   $wi.protocols.ospf configure -state disabled
+                   $wi.protocols.ospf6 configure -state disabled
+               }
+               set changed 1
+           }
+       }               
+    } else {
+       foreach node $node_list {
+           if { $oper_mode == "edit" } {
+               setNodeModel $node $router_model
+               set router_ConfigModel $router_model
+               if { $router_ConfigModel != "static" } {
+                   set ripEnable [lindex $rdconfig 0]
+                   set ripngEnable [lindex $rdconfig 1]
+                   set ospfEnable [lindex $rdconfig 2]
+                   set ospf6Enable [lindex $rdconfig 3]
+                   setNodeProtocolRip $node  $ripEnable
+                   setNodeProtocolRipng $node $ripngEnable
+                   setNodeProtocolOspfv2 $node $ospfEnable
+                   setNodeProtocolOspfv3 $node $ospf6Enable
+               } else {
+                   $wi.protocols.rip configure -state disabled
+                   $wi.protocols.ripng configure -state disabled
+                   $wi.protocols.ospf configure -state disabled
+                   $wi.protocols.ospf6 configure -state disabled
+               }
+               set changed 1
+           }           
+       }               
+    }
+
+    if { $changed == 1 } {
+       redrawAll
+       updateUndoLog
+    }  
+    destroy $wi        
+}

diff --git a/initgui.tcl b/initgui.tcl
index 488cd7d61a65910dd1ffd1f931daeb3ef481f548..765cb92cb0a415ce4828b13a0cc09b00950edcc6 100755 (executable)
--- a/initgui.tcl
+++ b/initgui.tcl
@@ -26,7 +26,7 @@
 # and Technology through the research contract #IP-2003-143.
 #
 
-# $Id: initgui.tcl,v 1.49 2008/05/17 01:57:02 marko Exp $
+# $Id: initgui.tcl,v 1.50 2008/10/23 12:04:20 marko Exp $
 
 
 #****h* imunes/initgui.tcl
@@ -142,6 +142,18 @@ set showAnnotations 1
 set supp_router_models "xorp quagga static"
 set def_router_model quagga
 
+set model quagga
+set router_model $model
+set routerDefaultsModel $model
+set ripEnable 1
+set ripngEnable 1
+set ospfEnable 0
+set ospf6Enable 0
+set routerRipEnable 1
+set routerRipngEnable 1
+set routerOspfEnable 0
+set routerOspf6Enable 0
+set rdconfig [list $routerRipEnable $routerRipngEnable $routerOspfEnable $routerOspf6Enable]
 
 #
 # Window / canvas setup section
@@ -246,8 +258,7 @@ bind . <Control-a> {
 .menubar.edit add command -label "Select adjacent" \
     -accelerator "Ctrl+N" -command selectAdjacent
 bind . <Control-n> selectAdjacent
-
-
+       
 #
 # Canvas
 #
@@ -338,36 +349,111 @@ menu .menubar.tools -tearoff 0
     
     $w.e1 configure -vcmd {checkIPv4Net %P}
 }
+.menubar.tools add command -label "Routing protocol defaults" -command {
+    upvar 0 ::cf::[set ::curcfg]::curcanvas curcanvas
+    upvar 0 ::cf::[set ::curcfg]::oper_mode oper_mode  
+    global router_model supp_router_models routerDefaultsModel
+    global routerRipEnable routerRipngEnable routerOspfEnable routerOspf6Enable
+
+    set wi .popup
+    catch {destroy $wi}
+    toplevel $wi
+    wm transient $wi .
+    wm resizable $wi 0 0
+    wm title $wi "Router Defaults"
+
+    frame $wi.model -borderwidth 4
+    label $wi.model.label -text "Model:" 
+    frame $wi.protocols -borderwidth 4
+    label $wi.protocols.label -text "Protocols:"
+    checkbutton $wi.protocols.rip -text "rip" -variable routerRipEnable
+    checkbutton $wi.protocols.ripng -text "ripng" -variable routerRipngEnable 
+    checkbutton $wi.protocols.ospf -text "ospfv2" -variable routerOspfEnable
+    checkbutton $wi.protocols.ospf6 -text "ospfv3" -variable routerOspf6Enable                       
+    radiobutton $wi.model.quagga -text quagga -variable router_model \
+       -value quagga -command {
+       $wi.protocols.rip configure -state normal
+       $wi.protocols.ripng configure -state normal
+       $wi.protocols.ospf configure -state normal
+       $wi.protocols.ospf6 configure -state normal
+    }
+    radiobutton $wi.model.xorp -text xorp -variable router_model \
+       -value xorp -command {
+       $wi.protocols.rip configure -state normal
+       $wi.protocols.ripng configure -state normal
+       $wi.protocols.ospf configure -state normal
+       $wi.protocols.ospf6 configure -state normal
+    }
+    radiobutton $wi.model.static -text static -variable router_model \
+       -value static -command {
+       $wi.protocols.rip configure -state disabled
+       $wi.protocols.ripng configure -state disabled
+       $wi.protocols.ospf configure -state disabled
+       $wi.protocols.ospf6 configure -state disabled
+    }
+    if { $router_model == "static" || $oper_mode != "edit" } {
+       $wi.protocols.rip configure -state disabled
+       $wi.protocols.ripng configure -state disabled
+       $wi.protocols.ospf configure -state disabled
+       $wi.protocols.ospf6 configure -state disabled                
+    }   
+    if { $oper_mode != "edit" } {
+       $wi.model.quagga configure -state disabled
+       $wi.model.xorp configure -state disabled
+       $wi.model.static configure -state disabled
+    }   
+
+    frame $wi.buttons
+    button $wi.buttons.b1 -text "Apply" -command { routerDefaultsApply $wi }
+    button $wi.buttons.b2 -text "Cancel" -command {
+       set router_model $routerDefaultsModel
+       set routerRipEnable [lindex $rdconfig 0]
+       set routerRipngEnable [lindex $rdconfig 1]
+       set routerOspfEnable [lindex $rdconfig 2]
+       set routerOspf6Enable [lindex $rdconfig 3]
+       destroy $wi             
+    }
+        
+    pack $wi.model -side top -fill x -pady 10
+    pack $wi.model.label -side left -padx 0 -pady 0
+    pack $wi.model.quagga $wi.model.xorp $wi.model.static \
+       -side left -expand 1 
+    pack $wi.protocols -side top 
+    pack $wi.protocols.label $wi.protocols.rip $wi.protocols.ripng \
+       $wi.protocols.ospf $wi.protocols.ospf6 -side left
+    pack $wi.buttons -side bottom -fill x -pady 2m
+    pack $wi.buttons.b1 $wi.buttons.b2 -side left -expand 1 
+}
 .menubar.tools add separator
 .menubar.tools add command -label "ns2imunes converter" \
     -underline 0 -command {
-       toplevel .ns2im-dialog
-       wm title .ns2im-dialog "ns2imunes converter"
-    
-       set f1 [frame .ns2im-dialog.entry1]
-       set f2 [frame .ns2im-dialog.buttons]
+    toplevel .ns2im-dialog
+    wm title .ns2im-dialog "ns2imunes converter"
     
-       label $f1.l -text "ns2 file:"
-       entry $f1.e -width 25 -textvariable ns2srcfile
-       button $f1.b -text "Browse" -width 8 \
-           -command {
-               set srcfile [tk_getOpenFile -parent .ns2im-dialog \
-                   -initialfile $ns2srcfile]
-               $f1.e delete 0 end
-               $f1.e insert 0 "$srcfile"
-       }    
-       button $f2.b1 -text "OK" -command {
-           ns2im $srcfile
-           destroy .ns2im-dialog
-       }
-       button $f2.b2 -text "Cancel" -command { destroy .ns2im-dialog}
+    set f1 [frame .ns2im-dialog.entry1]
+    set f2 [frame .ns2im-dialog.buttons]
     
-       pack $f1.b $f1.e -side right
-       pack $f1.l -side right -fill x -expand true
-       pack $f2.b1 -side left -expand true -anchor e
-       pack $f2.b2 -side left -expand true -anchor w
-       pack $f1  $f2 -fill x
+    label $f1.l -text "ns2 file:"
+    entry $f1.e -width 25 -textvariable ns2srcfile
+    button $f1.b -text "Browse" -width 8 \
+       -command {
+           set srcfile [tk_getOpenFile -parent .ns2im-dialog \
+               -initialfile $ns2srcfile]
+           $f1.e delete 0 end
+           $f1.e insert 0 "$srcfile"
+    }    
+    button $f2.b1 -text "OK" -command {
+       ns2im $srcfile
+       destroy .ns2im-dialog
     }
+    button $f2.b2 -text "Cancel" -command { destroy .ns2im-dialog}
+    
+    pack $f1.b $f1.e -side right
+    pack $f1.l -side right -fill x -expand true
+    pack $f2.b1 -side left -expand true -anchor e
+    pack $f2.b2 -side left -expand true -anchor w
+    pack $f1  $f2 -fill x
+}
 
 
 #

diff --git a/nodecfg.tcl b/nodecfg.tcl
index a14d61a43fb9b92967c94aaaf6cdd94f5f76f701..f97e959a2257ac0f1d385cd83f156895855d61d9 100755 (executable)
--- a/nodecfg.tcl
+++ b/nodecfg.tcl
@@ -26,7 +26,7 @@
 # and Technology through the research contract #IP-2003-143.
 #
 
-# $Id: nodecfg.tcl,v 1.22 2008/01/02 12:08:46 marko Exp $
+# $Id: nodecfg.tcl,v 1.23 2008/10/23 12:04:20 marko Exp $
 
 
 #****h* imunes/nodecfg.tcl
@@ -422,16 +422,16 @@ proc setCustomConfig { node id cmd cfg delete addccfg } {
     if { $addccfg == 0 && $delete == 0 } {
            set $node [lreplace [set $node] $i $i]
        } elseif { $addccfg == 0 && $delete == 1 }  {
-        if { $cid == $id } {
-            set $node [lreplace [set $node] $i $i]
-        }
+       if { $cid == $id } {
+           set $node [lreplace [set $node] $i $i]
+       }
     } else {
-        if { $cid == $id } {
-            set warning "Choose another custom config id!"
-            tk_messageBox -message $warning -type ok -icon warning \
-                -title "Custom configuration id warning"
-            set $node [lreplace [set $node] $i $i]
-        }
+       if { $cid == $id } {
+           set warning "Choose another custom config id!"
+           tk_messageBox -message $warning -type ok -icon warning \
+               -title "Custom configuration id warning"
+           set $node [lreplace [set $node] $i $i]
+       }
     }
     
     }
@@ -1564,35 +1564,69 @@ proc newIfc { type node } {
 
 proc newNode { type } {
     upvar 0 ::cf::[set ::curcfg]::node_list node_list
-    global def_router_model
+    global ripEnable ripngEnable ospfEnable ospf6Enable
+    global rdconfig router_model router_ConfigModel
+    global def_router_model 
     global viewid
     catch {unset viewid}
        
+    set ripEnable [lindex $rdconfig 0]
+    set ripngEnable [lindex $rdconfig 1]
+    set ospfEnable [lindex $rdconfig 2]
+    set ospf6Enable [lindex $rdconfig 3]       
+    set router_ConfigModel $router_model
+       
     set node [newObjectId node]
     upvar 0 ::cf::[set ::curcfg]::$node $node
     set $node {}
     lappend $node "type $type"
     if { $type == "router" } {
-       lappend $node "model $def_router_model"
+       if { $router_model != $def_router_model } {
+           lappend $node "model $router_model"
+       } else {
+           lappend $node "model $def_router_model"
+       }
        set nconfig [list \
                "hostname $node" \
-               ! \
+               ! ]
+       if { $ripEnable == 1 } {
+           lappend nconfig \
                "router rip" \
                " redistribute static" \
                " redistribute connected" \
                " network 0.0.0.0/0" \
-               ! \
+               ! 
+       } 
+       if { $ripngEnable == 1 } {
+           lappend nconfig \
                "router ripng" \
                " redistribute static" \
                " redistribute connected" \
                " network ::/0" \
-               ! ]
+               ! 
+       } 
+       if { $ospfEnable == 1 } {
+           lappend nconfig \
+               "router ospf" \
+               " redistribute static" \
+               " redistribute connected" \
+               " network 0.0.0.0/0" \
+               ! 
+       } 
+       if { $ospf6Enable == 1 } {
+           lappend nconfig \
+               "router ospf6" \
+               " redistribute static" \
+               " redistribute connected" \
+               " network ::/0" \
+               ! 
+       }
     } elseif {$type == "rj45"} {
        set nconfig [list \
                "hostname UNASSIGNED" \
                ! ]
-       } else {
-               set nconfig [list \
+    } else {
+       set nconfig [list \
                "hostname $node" \
                ! ]
     }
@@ -1649,6 +1683,193 @@ proc setNodeMirror { node value } {
     }
 }
 
+#****f* nodecfg.tcl/getNodeProtocolRip
+# NAME
+#   getNodeProtocolRip
+# SYNOPSIS
+#   getNodeProtocolRip $node_id
+# FUNCTION
+#   checks if node's current protocol is rip.
+# INPUTS
+#   * node_id -- node id 
+#****
+
+proc getNodeProtocolRip { node } {
+    upvar 0 ::cf::[set ::curcfg]::$node $node    
+          
+    if { [netconfFetchSection $node "router rip"] == "{ redistribute static} { redistribute connected} { network 0.0.0.0/0}" } {
+       return 1;
+    } else {   
+       return 0;
+    }      
+}
+
+#****f* nodecfg.tcl/getNodeProtocolRipng
+# NAME
+#   getNodeProtocolRipng
+# SYNOPSIS
+#   getNodeProtocolRipng $node_id
+# FUNCTION
+#   checks if node's current protocol is ripng.
+# INPUTS
+#   * node_id -- node id 
+#****
+
+proc getNodeProtocolRipng { node } {
+    upvar 0 ::cf::[set ::curcfg]::$node $node    
+          
+    if { [netconfFetchSection $node "router ripng"] == "{ redistribute static} { redistribute connected} { network ::/0}" } {
+       return 1;
+    } else {   
+       return 0;
+    }      
+}
+
+#****f* nodecfg.tcl/getNodeProtocolOspfv2
+# NAME
+#   getNodeProtocolOspfv2
+# SYNOPSIS
+#   getNodeProtocolOspfv2 $node_id
+# FUNCTION
+#   checks if node's current protocol is ospfv2.
+# INPUTS
+#   * node_id -- node id
+#****
+
+proc getNodeProtocolOspfv2 { node } { 
+    upvar 0 ::cf::[set ::curcfg]::$node $node
+
+    if { [netconfFetchSection $node "router ospf"] == "{ redistribute static} { redistribute connected} { network 0.0.0.0/0}"} {       
+       return 1;
+    } else {   
+       return 0;
+    }  
+}
+
+#****f* nodecfg.tcl/getNodeProtocolOspfv3
+# NAME
+#   getNodeProtocolOspfv3
+# SYNOPSIS
+#   getNodeProtocolOspfv3 $node_id
+# FUNCTION
+#   checks if node's current protocol is ospfv3.
+# INPUTS
+#   * node_id -- node id
+#****
+
+proc getNodeProtocolOspfv3 { node } { 
+    upvar 0 ::cf::[set ::curcfg]::$node $node
+
+    if { [netconfFetchSection $node "router ospf6"] == "{ redistribute static} { redistribute connected} { network ::/0}"} {   
+       return 1;
+    } else {   
+       return 0;
+    }  
+}
+
+#****f* nodecfg.tcl/setNodeProtocolRip
+# NAME
+#   setNodeProtocolRip
+# SYNOPSIS
+#   setNodeProtocolRip $node_id $ripEnable
+# FUNCTION
+#   Sets node's protocol to rip.
+# INPUTS
+#   * node_id -- node id
+#   * ripEnable -- 1 if enabling rip, 0 if disabling 
+#****
+
+proc setNodeProtocolRip { node ripEnable} {
+    upvar 0 ::cf::[set ::curcfg]::$node $node    
+          
+    if { $ripEnable == 1 } {
+       netconfInsertSection $node [list "router rip" \
+               " redistribute static" \
+               " redistribute connected" \
+               " network 0.0.0.0/0" \
+               ! ]
+    } else {   
+       netconfClearSection $node "router rip"  
+    }      
+}
+
+#****f* nodecfg.tcl/setNodeProtocolRipng
+# NAME
+#   setNodeProtocolRipng
+# SYNOPSIS
+#   setNodeProtocolRipng $node_id $ripngEnable
+# FUNCTION
+#   Sets node's protocol to ripng.
+# INPUTS
+#   * node_id -- node id
+#   * ripngEnable -- 1 if enabling ripng, 0 if disabling 
+#****
+
+proc setNodeProtocolRipng { node ripngEnable} {
+    upvar 0 ::cf::[set ::curcfg]::$node $node    
+          
+    if { $ripngEnable == 1 } {
+       netconfInsertSection $node [list "router ripng" \
+               " redistribute static" \
+               " redistribute connected" \
+               " network ::/0" \
+               ! ]
+    } else {   
+       netconfClearSection $node "router ripng"        
+    }      
+}
+
+#****f* nodecfg.tcl/setNodeProtocolOspfv2
+# NAME
+#   setNodeProtocolOspfv2
+# SYNOPSIS
+#   setNodeProtocolOspfv2 $node_id $ospfEnable
+# FUNCTION
+#   Sets node's protocol to ospf.
+# INPUTS
+#   * node_id -- node id
+#   * ospfEnable -- 1 if enabling ospf, 0 if disabling
+#****
+
+proc setNodeProtocolOspfv2 { node ospfEnable} { 
+    upvar 0 ::cf::[set ::curcfg]::$node $node
+
+    if { $ospfEnable == 1 } {
+       netconfInsertSection $node [list "router ospf" \
+               " redistribute static" \
+               " redistribute connected" \
+               " network 0.0.0.0/0" \
+               ! ]
+    } else {
+       netconfClearSection $node "router ospf"
+    }
+}
+
+#****f* nodecfg.tcl/setNodeProtocolOspfv3
+# NAME
+#   setNodeProtocolOspfv3
+# SYNOPSIS
+#   setNodeProtocolOspfv3 $node_id $ospf6Enable
+# FUNCTION
+#   Sets node's protocol to Ospfv3.
+# INPUTS
+#   * node_id -- node id
+#   * ospf6Enable -- 1 if enabling ospf6, 0 if disabling
+#****
+
+proc setNodeProtocolOspfv3 { node ospf6Enable} { 
+    upvar 0 ::cf::[set ::curcfg]::$node $node
+
+    if { $ospf6Enable == 1 } {
+       netconfInsertSection $node [list "router ospf6" \
+               " redistribute static" \
+               " redistribute connected" \
+               " network ::/0" \
+               ! ]
+    } else {
+       netconfClearSection $node "router ospf6"
+    }
+}
 
 #****f* nodecfg.tcl/setNodeType
 # NAME